|
|
Post by hannesausmwald on Jan 20, 2006 14:26:29 GMT 1
Hello, does anyone here made any experiences with braided stainless steel lines for clutch and brake lines for the Royal Star Venture? As I saw during scanning the web, there are no kits available from the two bigger manufacturers (Lucas, Spiegler). I know, that I can buy an custom made kit, but for this I would have to know the length and the kind of fittings etc, I would have to unmount the lines. So I thought of buying a kit from here: www.buckeyeperformance.com/but I don't know if this kit is allowed in Germany. Any Ideas? Greetings from Potsdam/Germany |
|
|
|
Post by johnjr on Jan 20, 2006 15:36:59 GMT 1
Hello Hannes....I hope that is your name....being an American living over here I sometimes get my tongue tied up with German names.......haa.....no problem though....yes, we can recommed a set of lines for you....Roland from Mannheim will come to this thread later today or tomorrow and he can give you the information you need..He and I both put the same lines on from a manufacture he knows in Deutschland.....so please wait a little bit and he can help you........and by the way, you can also use Buckeye's lines, they are legal and will pass TUX???TUF??? with no problem ..if that is what you are refering too.... Welcome to our forum and please look around..we have many Deutsch riders and several near you who are on the site...we also have a Get together/ride/Meeting coming up in April/May in Isny you should consider coming too...you can see the info about it here on the site!!!!! And again....welcome from Switzerland!!!!!  |
|
|
|
Post by TwoWheels on Jan 21, 2006 9:13:30 GMT 1
Hi Hannes,I thought I would jump in here & welcome you to the club.
|
|
|
|
Post by roland on Jan 21, 2006 11:19:11 GMT 1
If my memory saves me right I ordered me the steel lines for the Royal Star 1300 A. they are quite the same and come with the ABE. Only the clutch line has to be a little longer (79 cm) but this line don't need the ABE. I will have a look for the bill and tell You the right explanations to order them.
BTW You can order the lines everywhere You want in Germany, if You know what You need (fittings, lenght etc). They come with a pressure protocol which makes them able to get written in the papers from the TÜV. They only have a look on the correct install. So You don't need a ABE carrying with You.
Had mine installed and forgot the ABE when I had my technical inspection at the TÜv. They only asked me if I have a ABE. I said "Yes" and I passed the examination.
|
|
|
|
Post by hannesausmwald on Jan 23, 2006 8:55:30 GMT 1
Hello Roland, Noel, John,
thank you for your warm welcome.
Roland, it would be nice, if you could email me the right explanations. BTW, I think we had Email-Kontact some years ago, so welcome again.
John, we met each other four years ago during the International meeting of the Venture Club Deutschland. I was one of the three riders with a RSV during the weekend in Gunderath (Gran Dorado Ferienpark). Hope we can ride together again sometimes.
Greetings from Germany
Steffen Hanne
|
|
|
|
Post by johnjr on Jan 23, 2006 9:32:19 GMT 1
Steffen......Sure I remember you now.....fantastic, it is great to hear from you again, it has been a long time!!!! Welcome back, and for sure keep in touch with us and try to join us for a get together somewhere this year!!!! Welcome BACK!!!!!! ;D |
|
|
|
Post by roland on Jan 23, 2006 12:43:27 GMT 1
Sure, Steffen, I remember too! I will have a look for my bills from the lines and send a copy to You later this day. Hope to meet You anywhere in person. Don't You have free time to come to Isny? Your'e welcome!
Viele Grüße
Roland
|
|
|
|
Post by roland on Jan 23, 2006 16:07:55 GMT 1
Steffen, You have pm!
|
|
|
|
Post by hannesausmwald on Jan 23, 2006 18:58:17 GMT 1
Roland,
PM back. Thank you for your help.
I will take a look for the informations about meeting in Isny. Maybe we will see us there.
Steffen
|
|
|
|
Post by Shooter on Jan 24, 2006 1:29:20 GMT 1
I have braided overlength hoses and throttle cables as I switched to the Flanders bars. Got al the cables from Buckey without problem.
|
|
dutch
Full Forum Member 
Posts: 12
|
Post by dutch on Feb 21, 2006 12:23:19 GMT 1
|
|
