valhalla
Pres. of Venture Club
Venture Club U.K.
Posts: 167
|
Post by valhalla on Aug 14, 2009 9:56:53 GMT 1
;D ;D ;D ;D ;D Hi everyone im'e back .Has ennyone had or is having problems starting there Venture when the engime is hot .Well i have the answer to your problem. If you have a good battery then the problem is the starter motor.I have been experimenting with 2nd gen starters as these are a much more powerfull starter and once fitted they realy do do the trick. They have a larger windings inside and are slightly longer than the original. Sometimes the 1st gen ventures do suffer with the starter clutch coming loose in the housing behind the generator this causes the starter clutch to drop out and clonk when it does this . When stripped down you will also find it has probably cracked the starter clutch body . this will meen replaceing the whole starter clutch with part No11H-15580-00-00 these are not cheap and retail at about 130 euro or £120 in the uk . . If you sort out all these problems you will never have any starting problems aver again ;D ;D ;D ;D ;D ;D ;D
|
|